• BAL-200_Quart.png

    Bearing Assembly Lubricant Protects Parts During Assembly and Maintenance Cycles

    Balance, align and lift your fans, bearings, generators and turbine motors with BAL-200® bearing assembly lubricant. BAL-200 provides lift for the parts and works for any rotor or bearing that requires maintenance, which ensures smooth and effortless rotation during assembly or maintenance.

    Apply as needed to coat the shaft and surface. It is translucent in use, making it easy to visually inspect parts during maintenance. BAL-200 is fully compatible with most industrial oils and turbine oils; there is no cross-contamination risk, and it will not change the performance characteristics of the oils.

  • 802_TH

    HDSD is highly effective in removing heavy greases, oil, adhesives, lubricants, tar, waxes, asphalt, resins, and other heavy materials.

  • 804_TH

    Silicone-based spray for use as a lubricant with incidental food contact. May be used on machine parts and equipment in locations in which there is potential exposure of the lubricated part to food. For food plant and other industrial use.

  • Pails/Drums/Oil

    Load-Carrying Oil Is Tough on Rust, Gentle on Environment

    Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE's Wirelife® Low Tox® Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    Pure, Nonstaining Lubricant Provides Reliable Water-Resistant Protection for Food Equipment

    LE’s H1 Quinplex® White Oil (4010-4040) is an NSF H1 registered lubricant designed to use in food processing equipment where incidental contact may occur or where a clean, nonstaining lubricant is required. It contains Quinplex, LE’s proprietary impact-resistant additive, and is superior to competitive products in oxidation and wear resistance. It reliably extends asset life and decreases the likelihood of expensive unplanned downtime – crucial with high-capital, continuous process equipment.

  • Pails/Drums/Oil

    Food Grade Lubricant Clings to Equipment, Providing Reliable Water-Resistant Protection from Oxidation, Rust & Wear

    H1 Quinplex Synthetic Food Grade Oils (4032, 4046 and 4068, ISO 32, 46 and 68, respectively) are NSF H1 registered, Kosher Pareve and Halal certified lubricants designed to use in food processing and other sensitive environments where superior anti-wear, rust- and oxidation-resistant properties are required. Featuring 100% synthetic base oil, H1 Quinplex 4032, 4046 and 4068 have excellent load-carrying abilities, can be used in low-temperature applications, and contain Quinplex®, LE’s proprietary impact-resistant additive.

  • Pails/Drums/Oil

    Pure, Rust-Fighting Lubricant Protects Food Machinery

    Available both as a fluid (4058) and as an aerosol (4059), H1 Quinplex® Penetrating Oil & Lubricant is an outstanding food grade lubricant that works quickly to dissolve rust and free up frozen parts. It rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated with USP grade mineral base oil, this clear, odorless lubricant is NSF H1 registered, and Kosher Pareve and Halal certified for use in food processing equipment. It also contains Quinplex, LE’s proprietary impact-resistant additive.

  • Box (12 Cans Closed)

    Pure, Rust-Fighting Lubricant Protects Food Machinery

    Available both as a fluid (4058) and as an aerosol (4059), H1 Quinplex® Penetrating Oil & Lubricant is an outstanding food grade lubricant that works quickly to dissolve rust and free up frozen parts. It rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated with USP grade mineral base oil, this clear, odorless lubricant is NSF H1 registered, and Kosher Pareve and Halal certified for use in food processing equipment. It also contains Quinplex, LE’s proprietary impact-resistant additive.

  • Pails/Drums/Oil

    Food grade white mineral oil containing no additives. 

    NSF H1 registered for incidental food applications. Certified Halal by IFANCA and certified Kosher Pareve.


    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    A rust & oxidation (R & O) turbine oil designed with high-quality paraffinic base oil and additives that offer rust protection, oxidation stability, rapid water-separating characteristics and foam suppression. It will outperform conventional R & O turbine oils and is completely noncorrosive to equipment parts.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    Long-Lasting Oil Prevents Rust, Corrosion, Plugging & Wear

    Monolec® Paper Machine Lubricant is a high-performance paper machine oil specifically formulated to provide thermal oxidation stability and rust and corrosion protection for long oil life. Its detergency prevents carbon deposit buildup and coking to minimize oil system plugging and premature bearing failures. It also provides excellent wear protection, thanks to Monolec, LE’s proprietary wear-reducing additive. Available in three viscosity grades, it is ideally suited for paper machine circulating systems and shoe press applications.

  • Drums

    A high quality compressor oil designed specifically for use in centrifugal air compressors. Formulated with highly refined select paraffinic base stocks synergistically blended with additives that offer excellent corrosion protection, superior thermal stability, good water separation, antifoaming performance and oxidation resistance. Contains MONOLEC®, LE's exclusive wear-reducing additive.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    Increases Equipment Life and Promotes Easier Operation

    Among the most severe demands on lubricants are those related to operation of air-activated percussion tools such as rock drills and jack hammers. These demands include pounding, constant pressure and moist air. Unlike ordinary oils used for air-powered tool lubrication, which require frequent replenishment, Monolec® Rock Drill Lubricant possesses superior performance features and qualities designed specifically for more effective and prolonged service in these extreme service conditions.

  • Pails/Drums/Oil

    High-quality, long-lasting lubricant for machine tool slides & ways (slideways) and other sliding surfaces, including those using linear bearings. It features excellent lubricity and good adhesive properties. Contains Monolec®, LE’s exclusive wear-reducing additive. USDA H2 rated and approved for use in applications requiring the Cincinnati Machine P50 specification.

  • Pails/Drums/Oil

    High-Quality Oil Eliminates Overheating Shutdowns

    Monolec® Vacuum Pump Sealing Oil (6322) is a high-quality lubricant designed to increase equipment life and improve performance of liquid ring vacuum pumps. Formulated using highly refined mineral oils and optimized for severe service conditions, it offers rust and corrosion protection, oxidation stability and water-separating characteristics. It also contains Monolec, LE’s proprietary wear-reducing additive that provides additional protection from friction, heat and wear.

  • Pails/Drums/Oil

    Versatile Oil Provides Long-Term Anti-Wear Protection

    Monolec® R & O Compressor / Turbine Oil is a versatile, heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, it is ideally suited for use in all types of air compressors and oil circulating systems.

    This long-lasting, nonfoaming, turbine-quality oil provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. With its superior resistance to heat, oxidation and moisture, Monolec R & O Compressor / Turbine Oil significantly outperforms ordinary commercial air compressor and turbine oils. It contains Monolec, LE’s exclusive wear-reducing additive, as well as highly effective rust and oxidation inhibitors.

  • Pails/Drums/Oil

    Provides reduced toxicity without reduced performance

    LE’s Low Tox® Turbine Oil (6412-6414) provides long-lasting performance, equivalent to conventional turbine oils while providing lower toxicity than biodegradable turbine oils. Its advanced technology formulation – with highly refined mineral oil and specially selected additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products. Low Tox Turbine Oil meets or exceeds OEM requirements for many generators, turbines and governors; it is especially suited for use in hydroelectric facilities and flood control structures requiring lubricants.

  • Pails/Drums/Oil

    Premium Oil Boosts Turbine Performance

    Highly effective for steam, hydro and gas turbine applications, Monolec Turbine Oil (6461-6463) reduces varnish, reduces water contamination, lengthens equipment life and extends drain intervals. It is a premium, high performance turbine oil with excellent water separation characteristics, rust and oxidation inhibitors, and improved wear-reducing properties. Its proprietary formula consists of select low-volatility paraffinic base fluids enhanced with a synergistic mix of high-performance additives.

    Certain turbine applications - including gear-driven turbines or those in which a hydraulic control system and turbine share the same oil - require oil with anti-wear properties. Unlike many anti-wear additives that decrease the oxidation resistance of turbine oils, the proprietary wear-reducing additive in Monolec Turbine Oil provides increased protection against wear with no negative effect on the oxidation life of the oil.

    Monolec® is a registered trademark of Lubrication Engineers, Inc.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • LE Drums & Pails

    Advanced formula provides superior oxidation stability & deposit control for gas combustion turbines

    Formulated specifically for use in gas combustion turbines, Endure™ Turbine Oil (6481-6482) features a unique blend of highly refined base oils and proprietary additive technology. Its advanced formula provides superior oxidative and thermal stability while preventing varnish and sludge formation on critical surfaces. Endure Turbine Oil ensures long-lasting, trouble-free performance in gas combustion turbines, minimizing unplanned outages and maximizing uptime.

    Oil problems are estimated to be the cause of nearly one-fifth of all forced turbine outages, according to “A Comprehensive Guide to Industrial Turbine Lubricants,” by Afton Chemical Corp. Chief among the various mechanisms inside a turbine system that can result in degradation of the oil while in service are oxidation and thermal degradation.

    • Oxidation is the reaction of oxygen with a substance. When lubricants are exposed to oxygen, reactions occur that create new substances. For every 10°C (18°F) elevation in temperature, the rate of lubricant oxidation doubles, meaning at higher temperatures reactions speed up.
    • Thermal degradation occurs during micro-dieseling, cavitation and static discharge events, which produce very high, localized temperatures that thermally degrade the oil molecules in a lubricant.

    Oxidation and thermal degradation can lead to base fluid breakdown, additive depletion, increased viscosity, varnish and sludge formation, increased acid number, increased foaming, loss of water separation properties, filter plugging, valve sticking, and rust and corrosion. Bottom line – the lubricant’s life span is shortened and equipment reliability is compromised. LE developed Endure Turbine Oil to address these problems.

  • Pails/Drums/Oil

    Provides reduced toxicity without reduced performance

    LE’s Low Tox® Hydraulic Oil (6603) provides superior performance – equivalent to premium hydraulic oils – with long oil life and excellent wear protection, while providing lower toxicity than biodegradable hydraulic oils. Its advanced technology formulation – with highly refined mineral oil and specially selected ashless additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products.

  • Pails/Drums/Oil

    H1 Machine Oil was developed specifically for use in the Manzel lubrication system of Angelus seamers. It contains ashless additive technology that provides superior dispersant capabilities to completely emulsify water with the oil. It provides excellent anti-wear properties, including rust and oxidation resistance, is approved for  incidental food contact and resists foaming.

  • Pails/Drums/Oil

    Oxidation-Resistant Oil Ensures Cool-Running, Long-Lasting Electrical Equipment

    LE’s Transformer Oil (6760) is a highly oxidation-resistant oil for all types of electrical service. Designed for use as an insulating and cooling medium for electrical apparatus, it has excellent heat transfer properties for cooler operation and longer life.

  • Pails/Drums/Oil

    Versatile Oil Provides Superior Long-Term Anti-Wear Protection in Variety of Applications

    Multilec® Industrial Oil is a heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, this multipurpose lubricant is ideally suited for use in all types of air compressors, hydraulics, oil circulating systems, industrial turbines, and R & O industrial and gear applications.

    This long-lasting, nonfoaming, turbine-quality oil provides superior resistance to heat, oxidation and moisture. It also provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. Multilec Industrial Oil features a balanced blend of premium base oils and robust additive technology, including rust and oxidation inhibitors and Monolec, LE’s exclusive wear-reducing additive. This formulation delivers a powerful combination of performance and versatility that far exceeds that of other lubricants on the market – both synthetic and petroleum.

  • Pails/Drums/Oil

    Versatile Synthetic Provides Cool, Clean Performance

    Monolec Syn Industrial Oil (9032-9150, 9220-9680) is designed to prolong equipment life by combating the effects of high temperatures, contamination and loads that accelerate wear. It is a versatile synthetic lubricant that meets or exceeds the requirements of gearboxes, air compressors, vacuum pumps, hydraulic systems, and roll mill bearings found in the textile, plastic, rubber and paper industries. It is formulated with high-viscosity 100 percent synthetic base oil and a specially developed additive package for applications running at extreme temperatures. The additive package provides outstanding thermal stability and rust and oxidation resistance as well as wear resistance as pressures and temperatures rise. A foam suppressant completes the package. The base oil and additive formulation works synergistically to reduce wear, extend oil drain intervals, reduce oil consumption, and practically eliminate deposits and sludge formation, all while providing excellent compatibility with seals. 

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Grease

    PAG Gear Oil Provides Ultimate Wear Protection, Corrosion Resistance and Thermal Stability

    LE’s Duolec® PAG Gear Lubricant (9705-9707) is a PAG gear oil that has been specially formulated for the ultimate in corrosion resistance, wear protection and thermal stability. Polyalkylene glycol (PAG) lubricants are synthetic formulations known for their high viscosity index, extreme pressure (EP) properties, and ability to handle temperature extremes. In addition to the PAG base fluid, this formulation features Duolec®, LE’s proprietary dual-acting additive that provides both wear-reducing and EP protection.


    Duolec PAG Gear Lubricant is an excellent choice for lubricating a variety of bearings and gears – particularly worm gears – as well as other equipment operating under extreme conditions.


    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Drums/Pails/Grease/Quarter Drums

    High-Performance Synthetic Oil Provides Reliable, Long-Lasting Protection for Heavily Loaded Gearboxes

    Duolec® Syn Gear Lubricant is formulated with 100 percent synthetic base fluid to ensure excellent high- and low-temperature performance. The synthetic base fluid also provides oxidation stability, which contributes to long lubricant life and a reduction in costly lubricant changeovers.

    Duolec Syn Gear Lubricant provides uninterrupted operation and long service life for expensive gear applications, including heavily loaded gearboxes that are exposed to temperature extremes. With its special blend of clean gear technology additives, Duolec Syn Gear Lubricant works to prevent deposit formations in high-temperature applications and will not break down over time. The lubricant also provides exceptional low temperature flow properties, protecting gears during the coldest startups.

    Featuring Duolec®, LE’s proprietary additive that reduces friction and increases oil film strength, Duolec Syn Gear Lubricant is able to withstand incredible loads and stresses from heavy-duty applications such as pulverizer gear units.

  • Pails/Drums/Oil

    A pure synthetic oil for high temperature applications.

    Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

    To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.

    Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

    Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.

    One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.

    But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.

    MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

    While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    Synthetic H2 Lubricant Penetrates Hot Oven Chains, Remains Thermally Stable & Reduces Energy Use


    Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.

  • Pails/Drums/Grease

    Premium Fluid Ensures Long-Term Protection for Spindle Bearings

    Monolec® Spindle Oil is a high-quality oil designed for use in high-speed, precision machine tool spindle bearings. It is formulated using low-viscosity, highly refined mineral oil and offers rust and corrosion protection, oxidation stability and water-separating characteristics. It contains Monolec, LE’s proprietary wear-reducing additive that provides additional protection from friction, heat and wear.