• Drums/Pails/Grease/Quarter Drums

    Long-Lasting, Nonmelting Grease Provides Constant Protection for High-Temperature Bearing Applications

    Bearings operating in or near heat-generating equipment are subject to temperatures that cause ordinary greases to melt and run, leaving critical bearing surfaces unprotected. Almasol® High Temperature Lubricant is designed to withstand high temperatures, staying in place to provide constant lubrication. It also resists oxidation and vaporization. By ensuring longer lubrication intervals and fewer bearing failures, Almasol High Temperature Lubricant helps contribute to increased production and a healthier bottom line.

  • Drums/Pails/Grease/Quarter Drums

    Heavy-Duty Grease Performs in Extreme Conditions

    Almaplex® Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE's proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water.

    Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3 lubricants are recommended.

    Almaplex 1295 is an NLGI grade 000 semifluid grease that has superior film strength because of its synthetic high viscosity base oil. It is excellent for use in heavily loaded bearings in cold temperature applications. It performs well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Drums/Pails/Grease/Quarter Drums

    Solid Lubricant Grease with Calcium Sulfonate Complex Thickener Provides Lasting Protection for Heavy Mobile Equipment

    Lubrication Engineers, Inc. formulated its solid lubricant-containing, calcium sulfonate-thickened Almamoly™ HD Grease for use in severe conditions such as high temperatures, heavy loads and water. This high-performance grease is intended for long-lasting use in heavy-duty mobile equipment such as that used in construction, agriculture, open pit mining and road-building.

    Almamoly HD Grease contains Almasol®, LE’s proprietary solid additive as well as 5 percent molybdenum disulfide (also known as molydisulfide or moly). Compared to other solid lubricant-containing greases that rely on moly or graphite alone, Almamoly HD Grease’s synergistic combination of moly and Almasol gives it better wear resistance. This unique combination of solids helps ensure reliable lubrication, staying in place even when the lubricant is squeezed out of the contact zone due to extreme pressure (EP) or heavy shock loading. The calcium sulfonate complex thickener provides additional performance features that make this grease desirable for a variety of extreme conditions.

  • Drums/Pails/Grease/Quarter Drums

    Versatile Grease with Calcium Sulfonate Complex Thickener Protects Equipment from Heat, Moisture & Heavy Loads

    Lubrication Engineers, Inc. formulated Monocal® GP Grease for use in severe conditions such as high temperatures, heavy loads and water. Its high-performance formula features high-viscosity base fluid, calcium sulfonate complex thickener and Monolec®, LE’s proprietary wear-reducing additive. This premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, and water resistance – everything you need to protect and extend the life of your equipment.

    A versatile general purpose lubricant, Monocal GP Grease is the right solution for industrial and mobile equipment used in a wide variety of industries. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. Without effective, reliable lubrication, these conditions can lead to costly downtime and repairs.

  • Case 12 Aerosols (CSA)

    WITHSTANDS HIGH TEMPERATURES, WON'T SLING OFF, IN A CONVENIENT AEROSOL CAN

    LE's 9102 SYNTEMP® Synthetic Lubricant is a unique, heavy duty, high temperature spray lubricant designed for open gears, chains, cables, sealed bearings and slides - or any "tight" area where grease lubrication can be best accomplished by the spray method. Its superior lubricating qualities reduce wear, friction and heat far more effectively than ordinary greases.

    This high temperature grease is water resistant, non-melting, rust and oxidation resistant, mechanically stable, has EP characteristics and contains MONOLEC®, LE's exclusive wear-reducing additive.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Drums/Pails/Grease/Quarter Drums

    Heavy-duty synthetic lubricant specifically designed for high temperature applications.

    LE's ALMASOL® Syntemp Lubricant is a high temperature extreme pressure (EP) lubricant made from a very heavy synthetic fluid and non-melting base. It is specially formulated to provide exceptional protection at temperatures at which petroleum oils would completely oxidize (or carbonize).

    ALMASOL® Syntemp Lubricant is excellent for use on large open gears exposed to very high temperatures. It is also recommended for use on kiln girth gears, large industrial gearing, oven chains, sliding surfaces, large slow moving (friction) bearings and similar applications.

    Contains ALMASOL®, LE's exclusive wear-reducing additive, which protects against metal-to-metal contact and also serves to reduce friction and heat. ALMASOL® Syntemp Lubricant has exceptional water resistance and thus, remains unaffected by boiling water and steam. It also contains special rust inhibitors that prevent rust and corrosion.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.