A pure synthetic oil for high temperature applications.

Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.

Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.

One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.

But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.

MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Unit of Measure

Specifications

Available Container Size

N/A Drum

Buy this LE Product!

N/A Don't See Pricing? Register Today!

GHS Statement

N/A For commercial and professional use only

Typical Applications

N/A Originally designed as a high temperature chain and conveyor lubricant; however, it is also appropriate for sealed-for-life bearings and other high temperature applications.

Performance Requirements Met or Exceeded

N/A Baker Perkins 69-D

Asset Reliability Solutions

N/A Reliability Solution Products

Benefits and Recommendations

User Benefits

N/A
  • Oil dissipates at high temperatures, leaving no residue. Metal surfaces remain clean and chains, conveyors and bearings operate freely and smoothly.
  • Stable, long-lived oil. Does better job of lubricating with less lubricant consumed.
  • Cleans off deposits left by ordinary lubricants. Clean parts work smoother and more efficiently, requiring less power.
  • Easy to apply with standard equipment. No special equipment or tools needed to start realizing benefits of 9963 SYNOLEC immediately.
  • Cuts costly downtime by reducing wear and minimizing the danger of broken chains and conveyors, or seized bearings.
  • Controls rust and corrosion because of special additives.

Recommendation

N/A Do not use where extreme pressure (EP) gear oil is required. Also not recommended for use in food preparation equipment where incidental contact may occur.

Beneficial Qualities

N/A
  • Keeps chains and conveyors clean and free.
  • Helps eliminate broken chains and downtime.
  • Greatly increases chain life.
  • Contains MONOLEC®, LE's exclusive wear-reducing additive.
  • Oil sprays easily in standard equipment.
  • Cleans up deposits left by petroleum residues.
  • Rust and oxidation inhibited.
  • At high temperature oil dissipates with no residue.
  • Excellent thermal stability.

Physical Characteristics - Typical

Viscosity

N/A 14.3 cSt at 100ºC 417 SUS at 100ºF 75.8 SUS at 210ºF 82 cSt at 40ºC

Flash Point

N/A 262 ºC505 ºF

Color

N/A Green

Viscosity Index

N/A 180

Gravity

N/A 10.7 ºAPI

Pour Point

N/A -34 ºC-30 ºF

USDA Rating

N/A H2

Equivalent SAE Grade

N/A 40