Print Back
Heavy-Duty Grease Performs in Extreme Conditions

Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water.

Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3 lubricants are recommended.

Almaplex 1297 & 1295 (NLGI grades 0 & 000, respectively) are semifluid greases with superior film strength. They are excellent for use in heavily loaded bearings in cold temperature applications. They also perform well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.

Unit of Measure

Benefits and Recommendations

Available Container Size

N/A Single Tube

Buy this LE Product!

N/A Don't See Pricing? Register Today!

GHS Statement

N/A For professional and commercial use only

Beneficial Qualities

N/A Withstands Extreme Pressure
  • Provides superior protection against wear
  • Performs exceptionally well under heavy loads and shock loading
Resists Water & Corrosion
  • Contains long-lasting corrosion inhibitors, providing excellent resistance - even from seawater
  • Is highly resistant to water spray-off and wash-out
Operates in Broad Temp Range
  • Performs well in low and high temps
  • Demonstrates enhanced thermal and oxidation stability for longer service life
  • Has broad operating range of -40ºC (-40ºF) to 232ºC (450ºF)
    • Remains pumpable at low temps; 1297 & 1295 at extremely low temps
Provides Exceptional Benefits
  • Reverts to grease consistency, even after exposure to high temps
  • Resists mechanical shear
  • Possesses low volatility properties
  • Offers superior film strength due to cohesion and adhesion capacity

Available Grades

N/A
  • NLGI 2 (1299)
  • NLGI 1 (1298)
  • NLGI 0 (1297)
  • NLGI 000 (1295)

Proprietary Additives

N/A LE’s proprietary additives are used exclusively in LE lubricants. Almaplex Ultra-Syn Lubricant contains Almasol and Quinplex.

Almasol® solid wear-reducing additive is able to withstand extremely heavy loads, chemical attack and temperatures up to 1,900°F (1,038°C). It is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. Almasol minimizes metal-to-metal contact and the resulting friction, heat and wear.

Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion.

Typical Applications

N/A
  • Ball mill and kiln pinion support bearings
  • Construction, agricultural and mining equipment
  • Couplings (1299 only)
  • Extruders
  • Filter presses, dewatering presses
  • Hammer mills
  • Paper mill wet end, press rolls, felt rolls andcalendar stack bearings
  • Steel mill hot and heavily loaded bearings

Asset Reliability Solutions

N/A Reliability Solution Products

Customer Testimonials

N/A 1299 Corrugating Customer
1299 Harborlite Corp
1299 Vital Earth Resources

Physical Characteristics - Typical

Thickener Type

N/A Aluminum complex

Texture

N/A Stringy

Color

N/A Gold

NLGI Grade

N/A 2

Performance Test Results

Worked 60 Penetration ASTM D217

N/A 287

Worked 10K Penetration ASTM D217

N/A 290

Dropping Point ºC(ºF), ASTM D2265

N/A 273(523)

Flash Point ºC (ºF), ASTM D92

N/A 232 (450)

Viscosity @ 40°C, cSt, ASTM D445

N/A 460

Corrosion Prevention DI H2O, ASTM D1743

N/A Pass

Corrosion Prevention 3% Sea H2O, ASTM D5969

N/A Pass

EMCOR Rust Test DI H2O, ASTM D6138

N/A 0,0

Oil Separation 30 hrs @ 100ºC (212ºF), % Bleed, ASTM D6184

N/A <2

Timken OK Load lb, ASTM D2509

N/A 55

Four-Ball EP Weld Point kgf, ASTM D2596

N/A 315

Four-ball EP Load Wear Index kgf, ASTM D2596 Weld Point, kgf

N/A 69.7

Four-Ball Wear @ 75ºC (167ºF), 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266

N/A 0.49

Water Spray-off % Loss, ASTM D4049

N/A 6.6

Water Wash-out @ 80ºC (176ºF), % loss, ASTM D1264

N/A 0.45

Copper Corrosion 24 hrs @ 100ºC (212ºF), ASTM D4048

N/A 1b