Lubrication Engineers.Inc
Lubrication Engineers, Inc.
1919 E Tulsa Street
Wichita, KS 67216
Toll Free: (800) 537-7683
Email: info@le-inc.com
Website: www.le-inc.com
Print Back
Long-lasting Red Grease Stays Put & Runs Cool

Customers who rely upon Almagard Vari-Purpose Lubricant appreciate its cool-running, long-lasting, water-resistant performance. It dramatically lengthens grease intervals, eliminates bearing failures, can extend bearing life by up to threefold, and does not harden with age.

Recommended for extended service applications, Almagard is extremely tacky and will not wash off, pound out or melt and run, even in severe conditions. It is ideal for on-and off-road equipment where high impact occurs, as well as many in-plant applications.

Play Button

 Watch video of Almagard Vari-Purpose Lubricant

Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Unit of Measure

Benefits and Recommendations

Available Container Size

 N/A Quarter Drum

Buy this LE Product!

 N/A Don't See Pricing? Register Today!

GHS Statement

 N/A For commercial and professional use only

Beneficial Qualities

 N/A Withstands Pressure & Reduces Wear
  • Demonstrates superior extreme pressure characteristics
  • Provides exceptional anti-wear protection
  • Exhibits long-lasting mechanical stability, does not change consistency after being worked thousands of times
  • Maintains a seal against outside contaminants throughout its lifetime
  • Protects costly bearing surfaces - even bronze and alloy - from rust and corrosion
Stays Put
  • Clings tenaciously to metal, resisting repeated impact
    • Won't pound out or sling off
  • Stays in contact zone, even in high-moisture environments
    • Won't wash out of bearings
Takes the Heat & the Cold
  • Performs well in a broad temperature range
  • Has a dropping point of up to 282ºC (540ºF)
  • Resists oxidation and won't melt and run from bearings
  • 3750 (NLGI Grade 0) offers reliable pumpability at temps as low as -29ºC (-20ºF)

Available Grades

 N/A
  • NLGI 2 (3752)
  • NLGI 1 (3751)
  • NLGI 0 (3750)

Proprietary Additives

 N/A LE’s proprietary additives are used exclusively in LElubricants. Almagard Vari-Purpose Lubricant contains Almasol and Quinplex.

Almasol® solid wear-reducing additive is able to withstand extremely heavy loads, chemical attack and temperatures up to 1,900°F (1,038°C). It is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. Almasol minimizes metal-to-metal contact and the resulting friction, heat and wear.

Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion.

Performance Requirements Met or Exceeded

 N/A
  • 3752: Mack MG-C, Stord Rotadisc-Driers & Sweco-Vibro Equipment

Recommendation

 N/A
  • 3751 can be used in anti-friction bearings up to 6,000 rpm.
  • 3752 can be used in anti-friction bearings up to 3,000 rpm.

Typical Applications

 N/A
  • Chassis
  • Wheel bearings
  • Front axle arrangements
  • U-joints
  • Bucket pins
  • Bearings

Customer Testimonials

 N/A 3750 Pittsfield Fire Department

Asset Reliability Solutions

 N/A Reliability Solution Products

Physical Characteristics - Typical

Thickener Type

 N/A Lithium Complex

Texture

 N/A Smooth w/tack

Color

 N/A Red

NLGI Grade

 N/A 0

Performance Test Results

Worked 60 Penetration ASTM D217

 N/A 365

Dropping Point ºC(ºF), ASTM D2265

 N/A 218 (425)

Viscosity @ 100°C, cSt, ASTM D445

 N/A 11.70

Viscosity @ 40°C, cSt, ASTM D445

 N/A 144.0

Oxidation drop in psi @ 100 hrs, ASTM D942

 N/A 5

Oxidation drop in psi @ 1,000 hrs, ASTM D942

 N/A —

Corrosion Prevention Sea H2O, ASTM D5969

 N/A Pass

Corrosion Prevention DI H2O, ASTM D1743

 N/A Pass

Timken OK Load lbs, ASTM D2509

 N/A 70

Water Spray-off % Loss, ASTM D4049

 N/A —