LE’s H1 Quinplex® White Oil (4010-4040) is an NSF H1 registered lubricant designed to use in food processing equipment where incidental contact may occur or where a clean, nonstaining lubricant is required. It contains Quinplex, LE’s proprietary impact-resistant additive, and is superior to competitive products in oxidation and wear resistance. It reliably extends asset life and decreases the likelihood
moreLE’s H1 Quinplex® White Oil (4010-4040) is an NSF H1 registered lubricant designed to use in food processing equipment where incidental contact may occur or where a clean, nonstaining lubricant is required. It contains Quinplex, LE’s proprietary impact-resistant additive, and is superior to competitive products in oxidation and wear resistance. It reliably extends asset life and decreases the likelihood of expensive unplanned downtime – crucial with high-capital, continuous process equipment.
less
Available Container Size |
N/A Pail |
Buy this LE Product! |
N/A Don't See Pricing? Register Today! |
GHS Statement |
N/A For commercial and professional use only |
Beneficial Qualities |
N/A
Food Grade
|
Performance Requirements Met or Exceeded |
N/A
|
Typical Applications |
N/A
|
Proprietary Additive |
N/A
LE’s proprietary additives are used exclusively in LE lubricants. H1 Quinplex White Oil contains Quinplex.
Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion. |
Asset Reliability Solutions |
N/A Reliability Solution Products |
Customer Testimonials |
N/A
4030 Seneca Foods Corp |
Relative Density @ 60ºF/60ºF, ASTM D1298 |
N/A 0.880 |
Viscosity @ 100°C, cSt, ASTM D445 |
N/A 11.46 |
Viscosity @ 40°C, cSt, ASTM D445 |
N/A 98.01 |
Viscosity Index ASTM D2270 |
N/A 104 |
Flash Point ºC (ºF), (COC), ASTM D92 |
N/A 227 (441) |
Pour Point °C (°F), ASTM D97 |
N/A -30 (-22) |
Rust Test 4 hrs @ 60°C, DI H20, ASTM D665A |
N/A Pass |
Copper Corrosion 3 hrs @ 100ºC, ASTM D130 |
N/A 1b |
Oxidation by RPVOT @ 150ºC, minutes, ASTM D2272 |
N/A 800 |
Four-Ball Wear @ 75ºC, 1200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D4172 |
N/A 0.38 |
Emulsion Characteristics @ 54ºC, oil-water-emulsion/minutes, ASTM D1401 |
N/A 40-40-0/10 |
Emulsion Characteristics @ 82ºC, oil-water-emulsion/minutes, ASTM D1401 |
N/A 40-40-0/10 |
Foaming Characteristics @ 24ºC/93.5ºC/24ºC, 3 sequences, ml of foam / time to break, ASTM D892 |
N/A 0/0;0/0;0/0 |
