Lubrication Engineers.Inc
Lubrication Engineers, Inc.
1919 E Tulsa Street
Wichita, KS 67216
Toll Free: (800) 537-7683
Email: info@le-inc.com
Website: www.le-inc.com
Print Back

Synthetic formula features calcium sulfonate complex thickener


Formulated for use in food processing applications, H1 Quincal™ Syn FG Grease features a synthetic base fluid, calcium sulfonate complex thickener, and Quinplex, LE's proprietary impact-resistant additive. This premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, tackiness and water resistance - everything you need to protect and extend the life of your equipment.

NSF H1 registered for incidental food contact, this grease is the right solution for a wide variety of food processing applications. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. H1 Quincal is robust enough to handle elevated temperatures and other harsh conditions found at food manufacturing plants, resulting in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.
Unit of Measure

Benefits and Recommendations

Available Container Size

 N/A Tube

Buy this LE Product!

 N/A Don't See Pricing? Register Today!

Beneficial Qualities

 N/A Food Grade
  • Registered NSF H1 for incidental food contact
  • Certified Kosher Pareve
  • Certified Halal by IFANCA
High-Performance Formula
  • Features synthetic base fluid
  • Provides long-lasting reliable protection
  • Performs effectively in severe conditions such as heat, water and heavy loads
  • Ensures very low oil separation
Calcium Sulfonate Complex Thickener
  • Inherently prevents rust and corrosion – even when exposed to brine
  • Has very high dropping point as compared to conventional thickeners
  • Ensures excellent mechanical stability for long-lasting use
  • Imparts outstanding EP properties (without addition of heavy metals)
Wear, Water & Temp Resistant
  • Protects against wear, metal-to metal contact and scoring
  • Resists oxidation and water contamination
  • Clings to metal, will not sling off
  • Stays in contact zone, even in high moisture environments
  • Performs well in a broad temperature range, including moderately elevated temperatures
  • Maintains consistency after repeated heating and cooling
Available Grades
  • NLGI 2 (4072)
  • NLGI 1 (4071)
  • NLGI 0 (4070)

Proprietary Additive

 N/A LE’s proprietary additives are used exclusively in LElubricants. H1 Quincal Syn FG Grease contains Quinplex.
Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion.

Typical Applications

 N/A
  • Works well in variety of food processing applications, including:
    • Blenders
    • Cookers
    • Filling machines
    • Canning machines
    • Bottling machines
    • Packaging equipment

Performance Requirements Met or Exceeded

 N/A
  • NSF H1
  • Halal (certified by IFANCA)
  • Kosher Pareve

Physical Characteristics - Typical

Thickener Type

 N/A Calcium Sulfonate

Texture

 N/A Smooth w/tack

Color

 N/A Biege

NLGI Grade

 N/A 1

Performance Test Results

Worked 60 Penetration ASTM D217

 N/A 325

Worked 10K Penetration ASTM D217

 N/A ±3%

Worked 100K Penetration ASTM D217

 N/A ±5%

Dropping Point ºC(ºF), ASTM D2265

 N/A >316 (>600)

Flash Point ºC (ºF), (COC), ASTM D92

 N/A 252 (485)

Viscosity @ 100°C, cSt, ASTM D445

 N/A 13.8

Viscosity @ 40°C, cSt, ASTM D445

 N/A 100

Viscosity Index ASTM D2270

 N/A 139

Oxidation drop in psi @ 100 hrs, ASTM D942

 N/A ≤3

Oxidation by PDSC minutes @ 155°C, ASTM D5483

 N/A >120

Corrosion Prevention DI H2O, ASTM D1743

 N/A Pass

Corrosion Prevention 1% Sea H2O, ASTM D5969

 N/A Pass

Oil Separation 30 hrs @ 100ºC, % bleed, ASTM D6184

 N/A ≤2.00

Timken OK Load lbs, ASTM D2509

 N/A 60

Four-Ball EP Weld Point kgf, ASTM D2596

 N/A 620

Four-Ball EP Load Wear Index kgf, ASTM D2596

 N/A 75

Four-Ball Wear @ 75ºC, 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266

 N/A 0.50

Copper Corrosion 24 hrs @ 100ºC, ASTM D4048

 N/A 1b