• Pails/Oil

    Environmentally friendly, synthetic lubricant promotes smooth,long-lasting operation despite extreme heat & moisture

    Thorough, penetrating lubrication of the pin and bushing areas of oven chains is of utmost importance in ensuring smooth, efficient operation and long equipment life. Severe operating conditions, including extreme heat and moisture, can lead to corrosion and premature equipment failure if lubrication is inadequate.

    Other costly side effects resulting from inadequate lubrication include:
    • Chain links sticking and strands of chains becoming inflexible
    • Chains becoming longer because of rough operation and wear
    • Chains jumping off sprockets, contributing to early breakage and failure
    • Electrical energy consumption increasing as the amount of friction increases

    A successful oven chain lubricant has the ability to deliver the solids suspended in the lubricant carrier to the pin and bushing areas. As the carrier dissipates, only the necessary lubricating solids are left, coating the metal to prevent wear and corrosion. A good lubricant also will withstand heat over time – resisting oxidation – allowing it to last longer and continue to protect the equipment.

    Almasol® Oven Chain Lubricant is the solution to trouble-free oven chain lubrication. It contains a synergistic blend of lubricating solids, including submicron-sized Almasol particles, in a specially designed synthetic carrier fluid. The environmentally friendly fluid evaporates, leaving behind a protective film of solids to lubricate chain parts without any accumulation of gum, carbon particles or other hard deposits. The protective solid film is water-resistant and reduces frictional drag over a broad temperature range in excess of the operating temperature of most ovens.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Oil

    Almasol® Smokeless Chain Lubricant (2705) is a premium grade high-temperature chain lubricant. This USDA H2 lubricant is a dispersion of Almasol®, LE’s exclusive solid wear-reducing additive, and other submicron lubricating solids in a special high-temperature food grade synthetic carrier. It is suitable for application to hot chains without interrupting production, and will not smoke at temperatures up to approximately 288°C (550°F).


    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Oil

    Premium grade, high temperature chain lubricant contains ALMASOL®, and other submicron lubricating solids dispersed in a special high temperature synthetic carrier. Suitable for application to hot chains without interrupting production operations. When used as directed, the carrier penetrates to all moving parts, leaving a protective film of lubricating solids as it cleanly volatilizes without residue at high temperatures. Will not gum or char, offering maximum migration into chain pins. Reduces frictional drag without building up hard deposits.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    A pure synthetic oil for high temperature applications.

    Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

    To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.

    Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

    Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.

    One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.

    But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.

    MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

    While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.

    Lubrication Engineers operates under an ISO 9001 Certified Quality System.

  • Pails/Drums/Oil

    Synthetic H2 Lubricant Penetrates Hot Oven Chains, Remains Thermally Stable & Reduces Energy Use


    Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.