Tacky, Water-Resistant Grease Available in Convenient Aerosol

LE’s Syntemp® Synthetic Lubricant (9102) is a heavy-duty spray grease designed for open gears, chains, cables, sealed bearings and slides – or any hard-to-reach area. Available in an aerosol can, it is excellent for high-temperature applications and will not melt. It is extremely tacky and water-resistant, staying in place without slinging or dripping. Syntemp Synthetic Lubricant includes extreme pressure characteristics to protect against heavy loads while preventing rust and corrosion. This mechanically stable grease has an exceptionally high film strength that resists rupturing and protects against metal-to-metal contact. It contains Monolec®, LE’s exclusive wear-reducing additive.

High-Quality Grease Offers Versatile EP Performance

Monolec® Multiplex Lubricant (4622) is a highly versatile, longlife, lithium-complex-thickened grease designed for extreme pressure performance and extended relubrication intervals in a variety of industrial, marine, farm and fleet applications. It contains Monolec®, LE’s proprietary wear-reducing additive, and provides dependable performance in a broad operating temperature range in critical grease points including chassis and wheel bearings. Its versatility makes it possible to consolidate the number of greases used, especially helpful aboard a marine vessel.

Versatile Grease with Calcium Sulfonate Complex Thickener Protects Equipment from Heat, Moisture & Heavy Loads

Lubrication Engineers, Inc. formulated Monocal® GP Grease for use in environments with challenging conditions such as high temperatures, heavy loads and the presence of water. Its high-performance formula features high-viscosity base fluid, calcium sulfonate complex thickener and Monolec®, LE’s proprietary wear-reducing additive. Available in NLGI 2 and 1 grades, this premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, and water resistance – everything you need to protect and extend the life of your equipment.

A versatile general purpose lubricant, Monocal GP Grease is the right solution for industrial and mobile equipment used in a wide variety of industries. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. Without effective, reliable lubrication, these conditions can lead to costly downtime and repairs.

Heavy-Duty Grease Performs in Extreme Conditions

Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water.

Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3 lubricants are recommended.

Almaplex 1297 & 1295 (NLGI grades 0 & 000, respectively) are semifluid greases with superior film strength. They are excellent for use in heavily loaded bearings in cold temperature applications. They also perform well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.

Versatile Grease Offers Long-Lasting Protection

With its versatility and long-lasting performance, Almatek® General Purpose Lubricant (1232) increases uptime, reduces maintenance costs and lowers lubrication costs. It is a distinctive red color, which shows when fresh lubricant forces out old material. Almatek 1232 is recommended for use in construction, marine, mining, industrial and various other heavy-duty equipment applications.

Versatile Wear-Reducing Grease Protects Equipment from Moisture & Heat

A general purpose extreme pressure grease for heavy industrial use, Almaplex Industrial Lubricant is extremely versatile, minimizing inventory requirements and misapplication because it works in many different applications. It is especially effective in severe operations caused by moisture or high temperatures. Its robust aluminum complex formulation seals out water and other contaminants that can wreak havoc on the long-term life of equipment.

Almaplex Industrial Lubricant protects against oxidation, rust and corrosion, and its exceptional wear reduction has led LE customers worldwide to redefine “normal” or “expected” equipment life. With longer bearing life, fewer repairs, less downtime and lower lubricant consumption, switching to Almaplex has helped many companies lower their maintenance costs.

Polyurea Grease Prolongs Life of Electric Motor Bearings

Formulated with polyurea thickener and designed specifically for use in electric motor bearings, Monolec® Extend EM Grease offers superior mechanical stability for long service life. It features low bleed characteristics, excellent pumpability and great oxidation resistance. It is especially effective when severe industrial operating conditions such as extreme temperatures and high speeds are present.

Monolec® is a registered trademark of Lubrication Engineers, Inc. Perma® is a registered trademark of perma-tec GmbH u. Co. KG.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.