Silicone-based spray for use as a lubricant with incidental food contact. May be used on machine parts and equipment in locations in which there is potential exposure of the lubricated part to food. For food plant and other industrial use.

High-Performance Oil Delivers Superior Lubrication in High-Temperature, High-Load Applications

Duolec Industrial Gear Oil (1601-1610, 1302, 1304) is a high-performance industrial gear oil with ISO grades ranging from ISO VG 46 to 1500. Designed for use in any industrial gear or bearing application that requires a thermally stable, extreme pressure/antiscuff lubricant, it maintains performance even after filtration.

Duolec Industrial Gear Oil contains Duolec, LE’s dual acting additive that provides both wear-reducing and EP protection, and is fortified with a shear stable tackifier to provide adhesion to metal during use.

Environmentally friendly, synthetic lubricant promotes smooth,long-lasting operation despite extreme heat & moisture

Thorough, penetrating lubrication of the pin and bushing areas of oven chains is of utmost importance in ensuring smooth, efficient operation and long equipment life. Severe operating conditions, including extreme heat and moisture, can lead to corrosion and premature equipment failure if lubrication is inadequate.

Other costly side effects resulting from inadequate lubrication include:
• Chain links sticking and strands of chains becoming inflexible
• Chains becoming longer because of rough operation and wear
• Chains jumping off sprockets, contributing to early breakage and failure
• Electrical energy consumption increasing as the amount of friction increases

A successful oven chain lubricant has the ability to deliver the solids suspended in the lubricant carrier to the pin and bushing areas. As the carrier dissipates, only the necessary lubricating solids are left, coating the metal to prevent wear and corrosion. A good lubricant also will withstand heat over time – resisting oxidation – allowing it to last longer and continue to protect the equipment.

Almasol® Oven Chain Lubricant is the solution to trouble-free oven chain lubrication. It contains a synergistic blend of lubricating solids, including submicron-sized Almasol particles, in a specially designed synthetic carrier fluid. The environmentally friendly fluid evaporates, leaving behind a protective film of solids to lubricate chain parts without any accumulation of gum, carbon particles or other hard deposits. The protective solid film is water-resistant and reduces frictional drag over a broad temperature range in excess of the operating temperature of most ovens.

Almasol® Smokeless Chain Lubricant (2705) is a premium grade high-temperature chain lubricant. This USDA H2 lubricant is a dispersion of Almasol®, LE’s exclusive solid wear-reducing additive, and other submicron lubricating solids in a special high-temperature food grade synthetic carrier. It is suitable for application to hot chains without interrupting production, and will not smoke at temperatures up to approximately 288°C (550°F).

Premium grade, high temperature chain lubricant contains ALMASOL®, and other submicron lubricating solids dispersed in a special high temperature synthetic carrier. Suitable for application to hot chains without interrupting production operations. When used as directed, the carrier penetrates to all moving parts, leaving a protective film of lubricating solids as it cleanly volatilizes without residue at high temperatures. Will not gum or char, offering maximum migration into chain pins. Reduces frictional drag without building up hard deposits.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Pure, Nonstaining Lubricant Provides Reliable Water-Resistant Protection for Food Equipment

LE’s H1 Quinplex® White Oil (4010-4040) is an NSF H1 registered lubricant designed to use in food processing equipment where incidental contact may occur or where a clean, nonstaining lubricant is required. It contains Quinplex, LE’s proprietary impact-resistant additive, and is superior to competitive products in oxidation and wear resistance. It reliably extends asset life and decreases the likelihood of expensive unplanned downtime – crucial with high-capital, continuous process equipment.

Semi-Synthetic Grease Protects Against Moisture & Other Harsh Conditions at Food Manufacturing Plants

H1 Quinplex® Food Machinery Lubricant (4025-4022) is a semi-synthetic grease suitable for a broad operating temperature range. In addition to being a food grade grease – NSF H1 registered for incidental food contact – it is also robust enough to withstand moisture, high temperatures, extreme pressures and other harsh conditions found at food manufacturing plants. It features an aluminum complex thickener base, providing extreme water resistance, excellent mechanical stability, reversibility and tackiness. Key additives include Quinplex, LE’s proprietary impact-resistant additive, and a rust and oxidation inhibitor. Switching to H1 Quinplex Food Machinery Lubricant results in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.

Food Grade Lubricant Clings to Equipment, Providing Reliable Water-Resistant Protection from Oxidation, Rust & Wear

H1 Quinplex Synthetic Food Grade Oils (4032, 4046 and 4068, ISO 32, 46 and 68, respectively) are NSF H1 registered, Kosher Pareve and Halal certified lubricants designed to use in food processing and other sensitive environments where superior anti-wear, rust- and oxidation-resistant properties are required. Featuring 100% synthetic base oil, H1 Quinplex 4032, 4046 and 4068 have excellent load-carrying abilities, can be used in low-temperature applications, and contain Quinplex®, LE’s proprietary impact-resistant additive.

Long-Lasting, Nonmelting Food Grade Grease Provides Constant Protection for High-Temp Bearing Applications

Bearings operating in or near heat-generating equipment are subject to temperatures that cause ordinary greases to melt and run, leaving critical bearing surfaces unprotected. H1 Quinplex® High Temperature Lubricant is designed to withstand high temperatures, staying in place to provide constant lubrication. It also resists oxidation and vaporization, and it repels water. NSF H1 certified, it is a suitable lubricant for use in food processing and other sensitive environments. By ensuring longer lubrication intervals and fewer bearing failures, H1 Quinplex High Temperature Lubricant helps contribute to increased production and a healthier bottom line.

Pure, Rust-Fighting Lubricant Protects Food Machinery

Available both as a fluid (4058) and as an aerosol (4059), H1 Quinplex® Penetrating Oil & Lubricant is an outstanding food grade lubricant that works quickly to dissolve rust and free up frozen parts. It rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated with USP grade mineral base oil, this clear, odorless lubricant is NSF H1 registered, and Kosher Pareve and Halal certified for use in food processing equipment. It also contains Quinplex, LE’s proprietary impact-resistant additive.

Pure, Rust-Fighting Lubricant Protects Food Machinery

Available both as a fluid (4058) and as an aerosol (4059), H1 Quinplex® Penetrating Oil & Lubricant is an outstanding food grade lubricant that works quickly to dissolve rust and free up frozen parts. It rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated with USP grade mineral base oil, this clear, odorless lubricant is NSF H1 registered, and Kosher Pareve and Halal certified for use in food processing equipment. It also contains Quinplex, LE’s proprietary impact-resistant additive.

Superior Heat Resistance Keeps Oven Chain Operating Freely

Ovenworx® H1 Syn Chain Lubricant (4061) was formulated specifically to combat the demanding conditions present with oven chain applications. In addition, it is approved for incidental food contact and contains no artificial dyes, making it a good choice for food manufacturing plants.

Oven chain efficiency is dependent upon a lubricant that can keep the chain operating freely and smoothly, fighting the ever present heat and moisture that can cause corrosion and eventually lead to premature failure of oven chain pins and bushings. Only the most robust lubricant formulations can perform in this application; it is not an area to cut corners. If the oven chain fails, output comes to a screeching halt.

In addition to this high level of protection, equipment runs more cleanly and efficiently with Ovenworx 4061, which lubricates without the need of solids. Lubricants with solids have to be stirred to keep the solids distributed within the carrier and prevent them from falling out of the suspension. Solids also can create housekeeping issues by building up over time, creating gum and gunk around the application area, especially when over-applied.

Synthetic formula features calcium sulfonate complex thickener


Formulated for use in food processing applications, H1 Quincal™ Syn FG Grease features a synthetic base fluid, calcium sulfonate complex thickener, and Quinplex, LE's proprietary impact-resistant additive. This premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, tackiness and water resistance - everything you need to protect and extend the life of your equipment.

NSF H1 registered for incidental food contact, this grease is the right solution for a wide variety of food processing applications. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. H1 Quincal is robust enough to handle elevated temperatures and other harsh conditions found at food manufacturing plants, resulting in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.

Protects Gearboxes in Food Production Applications

Recommended for a variety of gearboxes and other critical applications in food and beverage manufacturing facilities,H1 Quinplex® White Gear Lubricant (4090-4250) is NSF H1 registered for incidental food contact and was formulated to withstand severe loading conditions and prevent rust and corrosion. H1 Quinplex White Gear Lubricant contains a carefully selected blend of pure mineral and synthetic base stocks to provide superior protection at a wide range of operating temperatures. It also offers antiwear protection, differentiating it from many other white oils on the market. To ensure good metal adhesion, it contains a shear stable polymeric tackifier system including Quinplex®, LE·s proprietary impact-resistant additive.

H1 Quinplex White Gear Lubricant helps factories avoid unplanned downtime and expensive repairs by providing long-lasting, reliable protection that keeps critical equipment running.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Synthetic Food Grade Oil Protects Gears in Extreme High and Low Temperatures

Recommended for a variety of gearboxes and other critical applications in food and beverage manufacturing facilities, H1 Quinplex® Syn FG Gear Oil (4150-4460) is NSF H1 registered for incidental food contact and was formulated to withstand severe loading conditions and prevent rust and corrosion. H1 Quinplex Syn FG Gear Oil contains 100 percent synthetic base stock to provide superior protection in extreme high and low temperatures. It also offers great seal compatibility and excellent nonfoaming qualities. Its anti-wear capability differentiates it from many other white oils on the market. To ensure good metal adhesion, it contains a shear stable polymeric tackifier system including Quinplex®, LE’s proprietary impact-resistant additive. H1 Quinplex Syn FG Gear Oil helps factories avoid unplanned downtime and expensive repairs by providing longlasting, reliable protection that keeps critical equipment running in extreme temperatures.

Food grade white mineral oil.

NSF H1 registered for incidental food applications. Certified Halal by IFANCA and certified Kosher Pareve.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Versatile Oil Provides Long-Term Anti-Wear Protection

Monolec® R & O Compressor / Turbine Oil is a versatile, heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, it is ideally suited for use in all types of air compressors and oil circulating systems.

This long-lasting, nonfoaming, turbine-quality oil provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. With its superior resistance to heat, oxidation and moisture, Monolec R & O Compressor / Turbine Oil significantly outperforms ordinary commercial air compressor and turbine oils. It contains Monolec, LE’s exclusive wear-reducing additive, as well as highly effective rust and oxidation inhibitors.

Versatile Oil Provides Superior Long-Term Anti-Wear Protection in Variety of Applications

Multilec® Industrial Oil is a heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, this multipurpose lubricant is ideally suited for use in all types of air compressors, hydraulics, oil circulating systems, industrial turbines, and R & O industrial and gear applications.

This long-lasting, nonfoaming, turbine-quality oil provides superior resistance to heat, oxidation and moisture. It also provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. Multilec Industrial Oil features a balanced blend of premium base oils and robust additive technology, including rust and oxidation inhibitors and Monolec, LE’s exclusive wear-reducing additive. This formulation delivers a powerful combination of performance and versatility that far exceeds that of other lubricants on the market – both synthetic and petroleum.

Tacky, Water-Resistant Grease Available in Convenient Aerosol

LE’s Syntemp® Synthetic Lubricant (9102) is a heavy-duty spray grease designed for open gears, chains, cables, sealed bearings and slides – or any hard-to-reach area. Available in an aerosol can, it is excellent for high-temperature applications and will not melt. It is extremely tacky and water-resistant, staying in place without slinging or dripping. Syntemp Synthetic Lubricant includes extreme pressure characteristics to protect against heavy loads while preventing rust and corrosion. This mechanically stable grease has an exceptionally high film strength that resists rupturing and protects against metal-to-metal contact. It contains Monolec®, LE’s exclusive wear-reducing additive.

A pure synthetic oil for high temperature applications.

Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.

Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.

One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.

But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.

MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Synthetic H2 Lubricant Penetrates Hot Oven Chains, Remains Thermally Stable & Reduces Energy Use

Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.