Heavy-Duty Synthetic Grease Provides Extreme Protection

5100 is the Aerosol version of "Pyroshield 5182 Grease"


Pyroshield Syn Open Gear Grease is a heavy-duty synthetic lubricant developed for large unshrouded open gears in the mining, mineral processing and cement industries, and for other severe service applications that require a lubricant with superior wear protection, exceptional load-carrying ability, outstanding tackiness and ease of application at various temperatures. It also works wellmore
Unit of Measure

Benefits and Recommendations

Available Container Size

Case 12 Aerosols

Buy this LE Product!

Don't See Pricing? Register Today!

Beneficial Qualities

  • NLGI 2 applied, 2 in use (5182)
  • NLGI 0 applied, 2 in use (5180)
  • Aerosol as applied, 2 in use (5100)

Available Grades

  • NLGI 2 applied, 2 in use (5182)
  • NLGI 0 applied, 2 in use (5180)
  • Aerosol as applied, 2 in use (5100)

Proprietary Additive

Conclusion

The graph clearly shows the outstanding preventive wear performance that Pyroshield Syn Open Gear Grease provides as compared to competitive products. Load Wear Index (LWI) is a measure of lubricant's ability to carry a load and minimize wear. The higher the value, the better the lubricant does in preventing wear.

LE Modified Timken Test

Conclusion

The results of the comparative product testing demonstrate the outstanding load-carrying capacity of Pyroshield Syn Open Gear Grease. It outperformed every competitive product that was tested. Pyroshield had a narrower wear scar and a lower block temperature than all the other lubricants. The test blocks of the competitive products experienced higher temperatures as a result of friction due to poor lubrication. The difference is easily visible in the amount of discoloration of the test blocks.
a1297.jpg

Pyroshield vs Competitive Open Gear Lubricants LWI

Conclusion

The graph clearly shows the outstanding preventive wear performance that Pyroshield Syn Open Gear Grease provides as compared to competitive products. Load Wear Index (LWI) is a measure of lubricant's ability to carry a load and minimize wear. The higher the value, the better the lubricant does in preventing wear.
a1375.jpg

Recommendations

  • Various applications in the mining and mineral processing industry
  • Open gears and slides
  • Ball mill open gears
  • Kiln open gears
  • Bar screens
  • Dipper sticks
  • Circle rails

Typical Applications

  • Various applications in the mining and mineral processing industry
  • Open gears and slides
  • Ball mill open gears
  • Kiln open gears
  • Bar screens
  • Dipper sticks
  • Circle rails

Asset Reliability Solutions

Reliability Solution Products

Customer Testimonials

5100 City of Moore

Physical Characteristics - Typical

Thickener Type

Bentone

Texture

Smooth/Tacky

Color

Purple

NLGI Grade as Applied

2

NLGI Grade in Service

2

Performance Test Results

Worked 60 Penetration ASTM D217

275

Worked 10K Penetration ASTM D217

+14

Worked 100K Penetration ASTM D217

+28

Dropping Point ºC(ºF), ASTM D2265

Non-melt

Flash Point ºC (ºF), ASTM D92

224 (435)

Viscosity @ 100°C, cSt, ASTM D445

690

Viscosity @ 40°C, cSt, ASTM D445

26,180

Pour Point °C (°F), ASTM D97

3 (37)

Oxidation drop in psi @ 100 hrs, ASTM D942

3

Corrosion Prevention DI H2O, ASTM D1743

Pass

Timken OK Load lbs, ASTM D2509

90

Four-Ball EP Weld Point kgf, ASTM D2596

500

Four-Ball EP Load Wear Index kgf, ASTM D2596

116

Four-Ball Wear @ 75ºC (167ºF), 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266

0.71

Water Spray-off % Loss, ASTM D4049

<2.0

Copper Corrosion 24 hrs @ 100ºC, ASTM D4048

1b