Premium Fluid Ensures Long-Term Protection for Spindle Bearings

Monolec® Spindle Oil is a high-quality oil designed for use in high-speed, precision machine tool spindle bearings. It is formulated using low-viscosity, highly refined mineral oil and offers rust and corrosion protection, oxidation stability and water-separating characteristics. It contains Monolec, LE’s proprietary wear-reducing additive that provides additional protection from friction, heat and wear.

Unit of Measure

Benefits and Recommendations

Available Container Size

N/A Pail

Buy this LE Product!

N/A Don't See Pricing? Register Today!

Beneficial Qualities

N/A Protects Against Water, Rust & Corrosion
  • Separates rapidly from water, allowing excess water to accumulate for easy drain-off
  • Protects metal surfaces against rust and corrosion
  • Delivers enhanced oxidation resistance
  • Provides exceptional resistance to moisture
Provides Long-Lasting Protection
  • Minimizes wear under high-load conditions
  • Provides long oil service life
  • Reduces maintenance costs
  • Prolongs equipment life
Minimizes Varnish & Sludge
  • Inhibits sludge, varnish and deposit formation
  • Prevents sludge during service
  • Keeps systems clean and operating smoothly

Typical Applications

N/A
  • High-speed precision machine tool spindles
  • Low-viscosity, low-pressure hydraulics

Proprietary Additive

N/A LE’s proprietary additives are used exclusively in LE lubricants. Monolec Spindle Oil contains Monolec.

Monolec® wear-reducing additive creates a single molecular lubricating film on metal surfaces, vastly increasing oil film strength without affecting clearances. An invaluable component in LE’s engine oils, industrial oils and many of its other lubricants, Monolec allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

Physical Characteristics

Color

N/A Amber

ISO VG

N/A 2

Performance Test Results

Viscosity @ 100°C, cSt, ASTM D445

N/A 1.02

Viscosity @ 40°C, cSt, ASTM D445

N/A 2.31

Flash Point ºC (ºF), (COC), ASTM D92

N/A 101 (213)

Pour Point °C (°F), ASTM D97

N/A -39 (-38)

Rust Test 4 hrs @ 60°C, DI H20, ASTM D665A

N/A Pass

Copper Corrosion 3 hrs @ 100ºC, ASTM D130

N/A 1a

Oxidation by RPVOT @ 150ºC, minutes, ASTM D2272

N/A 350

Four-Ball Wear @ 50°C, 1800 rpm, 20 kgf, 60 minutes, mm wear, ASTM D4172

N/A 0.29

Emulsion Characteristics @ 54ºC, oil-water-emulsion/minutes, ASTM D1401

N/A 40-40-0/05

Foaming Characteristics @ 24ºC/93.5ºC/24ºC, 3 sequences, ml of foam / time to break, ASTM D892

N/A 0/0;0/0;0/0