Versatile Water-Resistant Grease Formulated Specifically for Centralized Lubrication Systems

Designed especially for use in centralized lubrication systems, Monolec® Industrial Lubricant ensures consistent pumpability for reliable equipment protection in a variety of industrial applications. This aluminum complex grease provides excellent water resistance and will not form permanent emulsions when moisture is present, further protecting equipment from the effects of rust and corrosion. It contains Monolec®, LE’s proprietary wear-reducing additive that provides additional protection from wear, friction and heat; and it contains an extreme pressure additive for performance when heavy loads are present.
Unit of Measure

Benefits and Recommendations

Available Container Size

N/A Quarter Drum

Buy this LE Product!

N/A Don't See Pricing? Register Today!

GHS Statement

N/A For commercial and professional use only

Beneficial Qualities

N/A Lube System Compatibility
  • Reliably pumpable for centralizedlubrication equipment
  • Can handle extreme cold;pumpable down to -40°C (-40°F)
  • Exhibits low separation or“bleed” in centralized systems
Water ResistanceM
  • Combats moisture
  • Protects against rust & corrosion
Extreme Pressure &Wear Protection
  • Protects equipment againstmetal-to-metal contactand scoring
  • Performs well under heavy loadsand shock-loading conditions
Long-Lasting Performance
  • Maintains exceptionalfilm strength
  • Remains mechanicallystable throughout its use
  • Maintains consistencyafter being repeatedly heatedand cooled
  • Maintains excellent heatreversion
  • Will not oxidize or hardenwith age; old grease is easilypushed out and replaced withfresh grease

Available Grades

  • NLGI 1 (4701)
  • NLGI 0 (4702)
  • NLGI 00 (4700)

Proprietary Additives


LE’s proprietary additives are usedexclusively in LE lubricants. MonolecIndustrial Lubricant contains Monolec.

Monolec® wear-reducing additivecreates a single molecular lubricatingfilm on metal surfaces, vastlyincreasing oil film strength withoutaffecting clearances. An invaluablecomponent in LE’s engine oils,industrial oils and many of its otherlubricants, Monolec allows opposingsurfaces to slide by one another,greatly reducing friction, heat andwear.

Typical Applications

  • Centralized automatic lubrication systems
  • Use where pumpable medium-EPgrease is required
  • Especially good for low-temperaturegrease applications
  • 4701: Angelus Sanitary Can Machine
  • 4702: Diamond Power Soot Blowers


  • Operating range: -40° to 149°C (-40 to300°F)

Asset Reliability Solutions

N/A Reliability Solution Products

Physical Characteristics - Typical

Thickener Type

N/A Aluminum complex


N/A Smooth


N/A Red

NLGI Grade

N/A 0

Performance Test Results

Worked 60 Penetration ASTM D217

N/A 370

Dropping Point ºC(ºF), ASTM D2265

N/A 218 (425)

Flash Point °C(°F), (COC), ASTM D92

N/A 260 (500)

Viscosity @ 100°C, cSt, ASTM D445

N/A 12.50

Viscosity @ 40°C, cSt, ASTM D445

N/A 120.0

Oxidation drop in psi @ 100 hrs, ASTM D942

N/A 5

Corrosion Prevention DI H2O, ASTM D1743

N/A Pass

Timken OK Load lbs, ASTM D2509

N/A 45