Extended-Life Oil Provides Smooth Hydraulic Power

A long-lasting, nonfoaming oil designed to extend the life of hydraulic systems, Equipower™ Ultra HVI Hydraulic Oil (6522, 6532, 6546) offers superior protection against water contamination, rust, corrosion and oxidation. This high viscosity index formulation contains Monolec®, LE’s exclusive wear-reducing additive, and outperforms other commercial hydraulic oils in thermal, oxidative and hydrolytic stability. It is recommended for hydraulic applications with operating temperatures that fluctuate widely on a daily basis.

Unit of Measure

Benefits and Recommendations

Available Container Size

N/A Drum

Beneficial Qualities

N/A Long-Lasting, Cost-Saving Service
  • Provides longer service life than other commercial hydraulic oils
  • Extends drain intervals when properly maintained
  • Reduces oil consumption, including need for make-up oil
  • Minimizes labor and downtime required for oil changes
  • Eliminates fade and chatter by breaking up foam
High Viscosity Index Formula
  • Ensures smooth, uninterrupted power flow over wide temperature range
  • Increases energy efficiency, which also reduces greenhouse gas emissions
Wear Protection
  • Protects metal components from scuffing, galling and other wear
  • Minimizes equipment downtime and failure
  • Is compatible with most seals and hoses
  • Reduces need for replacement parts and labor
Water, Rust, Corrosion & Oxidation Resistance
  • Separates rapidly from water, allowing for easy water drain-off
  • Prevents rust and corrosion with R & O inhibitors
  • Provides superior oxidation resistance
    • Reduces sludge and varnish formation
    • Prevents plugged orifices and sticky valveso Maintains system cleanliness

Proprietary Additive

N/A

LE’s proprietary additives areused exclusively in LE lubricants.Equipower™ Ultra HVI HydraulicOil contains Monolec.

Monolec® wear-reducing additivecreates a single molecularlubricating film on metal surfaces,vastly increasing oil film strengthwithout affecting clearances. Aninvaluable component in LE’sengine oils, industrial oils andmany of its other lubricants,Monolec allows opposing surfacesto slide by one another, greatlyreducing friction, heat and wear.

Performance Requirements Met or Exceeded

N/A
  • AIST US Steel 126, 127 (6532 & 6546)
  • ASTM D6158 (HV)
  • Bosch-Rexroth RDE 90235 (6532 & 6546)
  • DIN 51524-3 (HV)
  • Eaton E-FDGN-TB002-E
  • Fives (Cincinnati Machine) P68 (6532)
  • Fives (Cincinnati Machine) P70 (6546)
  • GB 11118.1-2011 (L-HV)
  • GM LS-2 (6532)
  • ISO 11158 (HV)
  • JCMAS P041 HK (6532 & 6546)
  • Parker (formerly Denison) HF-0
  • SAE MS 1004 (HV)
  • SEB 181222

Typical Applications

N/A
  • Hydraulic pumps, motors and systems:
    • Construction equipment
    • Well service equipment
    • Utility service boom trucks
    • Forklifts
    • In-plant stationary applications

Recommendation

N/A
  • This product should not be used for fire-resistanthydraulic fluid applications.

Physical Characteristics - Typical

Color

N/A Red

ISO VG

N/A 22

Performance Test Results

Relative Density @ 60ºF/60ºF, ASTM D1298

N/A 0.867

Viscosity @ 100°C, cSt, ASTM D445

N/A 7.50

Viscosity @ 40°C, cSt, ASTM D445

N/A 22.0

Viscosity Index ASTM D2270

N/A 350

Flash Point °C (°F), (COC), ASTM D92

N/A 150 (302)

Pour Point °C (°F), ASTM D97

N/A <-60 (<-76)

Rust Test 4 hrs @ 60°C, DI H20, ASTM D665A

N/A Pass

Rust Test 4 hrs @ 60ºC, Sea H2O, ASTM D665B

N/A Pass

Copper Corrosion 3 hrs @ 100ºC, ASTM D130

N/A 1b

Emulsion Characteristics @ 54ºC, oil-water-emulsion/minutes, ASTM D1401

N/A 40-40-0/15

Air Release 9.0-90.0 cSt @ 40ºC: 50ºC, minutes, ASTM D3427

N/A 2.5

Specifications

Dielectric Strength, Kv, ASTM D877

N/A ≥40