Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water.
Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3 lubricants are recommended.
Almaplex 1297 & 1295 (NLGI grades 0 & 000, respectively) are semifluid greases with superior film strength. They are excellent for use in heavily loaded bearings in cold temperature applications. They also perform well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.
Benefits and Recommendations
Available Container Size |
N/A Pail |
Buy this LE Product! |
N/A Don't See Pricing? Register Today! |
GHS Statement |
N/A For professional and commercial use only |
Beneficial Qualities |
N/A
Withstands Extreme Pressure
|
Available Grades |
N/A
|
Proprietary Additives |
N/A
LE’s proprietary additives are used exclusively in LE lubricants. Almaplex Ultra-Syn Lubricant contains Almasol and Quinplex. Almasol® solid wear-reducing additive is able to withstand extremely heavy loads, chemical attack and temperatures up to 1,900°F (1,038°C). It is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. Almasol minimizes metal-to-metal contact and the resulting friction, heat and wear. Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion. |
Typical Applications |
N/A
|
Asset Reliability Solutions |
N/A Reliability Solution Products |
Customer Testimonials |
N/A
1299 Corrugating Customer 1299 Harborlite Corp 1299 Vital Earth Resources |
Physical Characteristics - Typical
Thickener Type |
N/A Aluminum complex |
Texture |
N/A Stringy |
Color |
N/A Gold |
NLGI Grade |
N/A 2 |
Performance Test Results
Worked 60 Penetration ASTM D217 |
N/A 287 |
Worked 10K Penetration ASTM D217 |
N/A 290 |
Dropping Point ºC(ºF), ASTM D2265 |
N/A 273(523) |
Flash Point ºC (ºF), ASTM D92 |
N/A 232 (450) |
Viscosity @ 40°C, cSt, ASTM D445 |
N/A 460 |
Corrosion Prevention DI H2O, ASTM D1743 |
N/A Pass |
Corrosion Prevention 3% Sea H2O, ASTM D5969 |
N/A Pass |
EMCOR Rust Test DI H2O, ASTM D6138 |
N/A 0,0 |
Oil Separation 30 hrs @ 100ºC (212ºF), % Bleed, ASTM D6184 |
N/A <2 |
Timken OK Load lb, ASTM D2509 |
N/A 55 |
Four-Ball EP Weld Point kgf, ASTM D2596 |
N/A 315 |
Four-ball EP Load Wear Index kgf, ASTM D2596 Weld Point, kgf |
N/A 69.7 |
Four-Ball Wear @ 75ºC (167ºF), 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266 |
N/A 0.49 |
Water Spray-off % Loss, ASTM D4049 |
N/A 6.6 |
Water Wash-out @ 80ºC (176ºF), % loss, ASTM D1264 |
N/A 0.45 |
Copper Corrosion 24 hrs @ 100ºC (212ºF), ASTM D4048 |
N/A 1b |