Heavy-duty synthetic lubricant specifically designed for high temperature applications.

LE's ALMASOL® Syntemp Lubricant is a high temperature extreme pressure (EP) lubricant made from a very heavy synthetic fluid and non-melting base. It is specially formulated to provide exceptional protection at temperatures at which petroleum oils would completely oxidize (or carbonize).

ALMASOL® Syntemp Lubricant is excellent for use on large open gears exposed to very high temperatures. It is also recommended for use on kiln girth gears, large industrial gearing, oven chains, sliding surfaces, large slow moving (friction) bearings and similar applications.

Contains ALMASOL®, LE's exclusive wear-reducing additive, which protects against metal-to-metal contact and also serves to reduce friction and heat. ALMASOL® Syntemp Lubricant has exceptional water resistance and thus, remains unaffected by boiling water and steam. It also contains special rust inhibitors that prevent rust and corrosion.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Unit of Measure


Available Container Size

N/A Pail

Buy this LE Product!

N/A Don't See Pricing? Register Today!

GHS Statement

N/A For commercial and professional use only

Typical Applications

  • Open Gears
  • Low Speed Plain Bearings
  • Cables
  • Chains
  • Sliding Surfaces
Open gears (kiln girth gears), oven chains, large bearings, etc., operating in a high temperature environment.

What is ALMASOL®?

N/A ALMASOL is LE's exclusive wear-reducing additive which has an affinity for metal similar to polar attraction. It attaches itself to working surfaces in a single microscopic layer, yet it will not build on itself or affect clearances. This microscopic layer possesses tremendous loadcarrying capacity, is impervious to acid attack and minimizes metal-to-metal contact and the resulting friction and wear. When added to LE lubricants, it gives an extra dimension of protection available in no other lubricant.

Asset Reliability Solutions

N/A Reliability Solution Products

Benefits and Recommendations

User Benefits

N/A Has high oxidation resistance
  • Even at extreme temperatures 9901 Almasol Syntemp Lubricant will not leave undesirable oxidation products such as varnish or gum.
High load carrying capacity
  • Ensures protection from wear even under the heaviest of loads. This high film strength of this product serves to cushion gear teeth when heavy or shock loads are encountered
  • Is formulated with a non-melting thickener, which ensures that the lubricant will not liquefy and run out of bearings or run off gears, cables or chains.
Reduced equipment failures due to superior wear and corrosion protection.

Elimination of deposit build-up; does not form carbon or varnish deposits.

Less lubricant is needed due to superior oxidation resistance.


N/A Use where an extremely high temperature, synthetic lubricant is required. This lubricant is typically designed for large bearings operating at very slow speeds.

Beneficial Qualities

N/A Long lasting under high temperatures; much longer than ordinary lubricants.
    Very sticky and adherent to metal.
    Protects against rust and corrosion.
    Excellent mechanical stability.
    EP (Extreme Pressure) characteristics.
    Remains plastic down to 0ºF. (-18ºC.).
    Highly water resistant. Resists boiling water or high temperature steam.
    Passes ASTM D4049 water spray-off test -- less than 5.0% spray-off.
    Timken OK load of 45 lbs.

Physical Characteristics - Typical

NLGI Grade

N/A 2


N/A 1,025 SUS at 210ºF 210 CSt at 100ºC 42,700 SUS at 100ºF 7,630 CSt at 40ºC

Worked Penetration @ 77ºF (25ºC)

N/A 265 to 295

Dropping Point

N/A None


N/A Very Tacky

Base Thickener

N/A Bentone


N/A Green

Performance Test Results

Timken, ASTM D2509

N/A 45 lb

Oxidation Stability, ASTM D942 (psi Drop @ 100 hrs)

N/A 3

Customer Testimonials