Advanced formula provides superior oxidation stability & deposit control for gas combustion turbines

Formulated specifically for use in gas combustion turbines, Endure™ Turbine Oil (6481-6482) features a unique blend of highly refined base oils and proprietary additive technology. Its advanced formula provides superior oxidative and thermal stability while preventing varnish and sludge formation on critical surfaces. Endure Turbine Oil ensures long-lasting, trouble-free performance in gasmore

Unit of Measure

Benefits and Recommendations

Available Container Size

Drum

Beneficial Qualities

  • Exhibits superior oxidative and thermal stability for long-term performance
  • Inhibits varnish, sludge and deposit formation
  • Exhibits superior air release properties and suppresses foam
  • Provides outstanding rust, corrosion and anti-wear protection
  • Separates readily from water
  • Is filterable for long-term oil cleanliness

Proprietary Additive

LE’s proprietary additivesare used exclusively in LElubricants. Monolec Turbine Oil contains Monolec.


Monolec® wear-reducing additive creates a single molecular lubricating film on metal surfaces, vastly increasing oil film strength without affecting clearances. An invaluable component in LE’s engine oils, industrial oils and many of its other lubricants, Monolec allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

Performance Requirements Met or Exceeded

  • DIN 51515, Part I & II
  • General Electric
  • JIS K 2213 Type 2
  • Siemens
  • Solar Turbine

Typical Applications

  • Combustion turbines
  • Combined cycle turbines
  • Centrifugal compressors

Physical Characteristics - Typical

Color

Amber

Color ASTM D1500

L2.0

ISO VG

46

Performance Test Results

Relative Density @ 60ºF/60ºF, ASTM D1298

0.863

Viscosity @ 100°C, cSt, ASTM D445

6.76

Viscosity @ 40°C, cSt, ASTM D445

45.30

Viscosity Index ASTM D2270

102

Flash Point ºC (ºF), (COC), ASTM D92

232 (449)

Pour Point °C (°F), ASTM D97

-24 (-11)

Rust Test 4 hrs @ 60ºC, Sea H2O, ASTM D665B

Pass

Copper Corrosion 3 hrs @ 100ºC, ASTM D130

1b

Oxidation by RPVOT @ 150ºC, minutes, ASTM D2272

1,150

Oxidation by TOST hours, ASTM D943

>10,000

Four-Ball Wear @ 75ºC, 1200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D4172

0.48

FZG, DIN 51354, A/8.3/90, Failure Load Stage

10

Emulsion Characteristics @ 54ºC, oil-water-emulsion/minutes, ASTM D1401

40/40/0-10

Foaming Characteristics @ 24ºC/93.5ºC/24ºC, 3 sequences, ml of foam / time to break, ASTM D892

0/0,0/0,0/0

Air Release 9.0-90.0 cSt @ 40ºC: 50ºC, minutes, ASTM D3427

4.0 max